3.3. Sweep the Filter with a pad
The obvious way to sweep the filter cutoff frequency is to grab the Cutoff knob and turn it.
But it's also very easy to use the pads to do the same thing while you're playing.
Leave all of the controls as they were in the
example above, but make
these three changes:
• Set the Filter Cutoff knob to minimum
• Set the Att > Cutoff knob to maximum
• Switch VCO 2 to Sawtooth. Sawtooth waves have more harmonics, so the filter
sweep will be more obvious.
Here's how the parameters in the VCO 2 and Filter sections should look after those changes
have been made. The rest of the settings should still resemble the "
" patch:
Now hold down a pad and slowly increase the pressure of your finger upon the pad. You'll
hear the filter open up as the pressure increases.
The pressure-sensitivity of the pads can be used to control other parameters, both inside the
MiniBrute 2S and on external devices. The
makes all of that possible.
VCO 2 / Filter settings for the Filter Sweep
example
12
Arturia - User Manual MiniBrute 2S - Quick Start
Summary of Contents for MINIBRUTE 2S
Page 1: ...USER MANUAL...
