Overview
4
Hubs without
Management
In addition to the TurboStack hubs with management, ATI offers six
models
without management
(i.e., Slave modules). When used in
conjunction with the managed hubs listed in Table 1, the TurboStack
Slave hubs become SNMP manageable. Table 2 details the specific model
number, port count and media/connector type available for these Slave
hubs.
Table 2: TurboStack Hubs without Management
Note
References in this manual to SMA and SM are interchangeable, both being
acronyms for Sub Miniature Assembly.
Attention
For additional information about the TurboStack slave hubs, refer to the
TurboStack™ AT-TS12FS/ST, SC, SM; AT-TS24TRS; AT-TS24TS Ethernet
Slave/Manageable Hubs Installation Manual
available on request through
your ATI sales reperesentative.
Wiring
Configuration
Rules
Depending on the medium you choose, there are certain wiring practices
you should follow to ensure the reliability of communication throughout
the network. TurboStack hubs comply with IEEE standards for 802.3
Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
Ethernet; you should refer to these standards when implementing your
network. Some important guidelines for ensuring integrity in network
wiring appear in later chapters and the appendices of this manual.
Chassis Configuration
Department
Concentrator
You can use a single manageable TurboStack hub in standalone mode or
as part of a department concentrator housed in a chassis. Various chassis
models are available for desktop or rackmount configurations. These
include 1-, 2-, 3-, 4-, 7-, and 8-module combinations for desktop or 19-inch
rackmount installations with standard or segmented backplanes.
Model Number
Port
Count
Media/Connector Type
AT-TS12FS/SM
12
Fiber Optic (10BASE-FL) with Sub Miniature Assembly
(SMA) connectors
AT-TS12FS/SC
12
Fiber Optic (10BASE-FL) with Subscriber Channel (SC)
Connectors
AT-TS12FS/ST
12
Fiber Optic (10BASE-FL) with Straight Tip (ST)
Connectors
AT-TS24TS
24
Two 50-Pin Telco Connectors
AT-TS24TRS
24
24 RJ45 Connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
