Artesyn MITX-CORE-820, Installation And Use Manual, Page: 89 / 133

BIOS
MITX-CORE-820 Installation and Use (6806800M10H )
88
5.4.2.7.3 IGD Configuration
5.4.2.8 South Bridge Configuration
Table 5-17 IGD Configuration
Field Description
IGD - Boot Type Selects the video device activated which will be activated during
POST. This has no effect if there are external graphics present.
Secondary boot display selection will appear based on your
selection. VGA modes are supported only on the primary
display.
IGD - Secondary Boot Type Selects secondary display device.
IGD - LCD Panel Type Selects the video device which will be activated during POST.
This has no effect if external graphics are present.
IGD - Active LFP Selects the active LFP configuration.
Panel Color Depth Selects the LFP panel color depth
Table 5-18 South Bridge Configuration Field Description
Field Description
DeepSx Mode Configures the DeepSx Mode configuration
State After G3 Specifies what state to switch to when power is re-applied after
a power failure (G3 State).
Watchdog Timer Enables or Disables Watchdog Timer function.
Watchdog Timer Settings Watchdog time out value.
GPI13 Wake Up Function Enables or Disables GPI13 as s wake event.
GPI13 Polarity GPI13 high or low polarity setting.
SB PCI Express Config Sets PCI express configuration. See SB PCI Express Config .
SB USB Config Sets USB configuration. See SB USB Configuration .
SB Azalia Config Sets HD Audio configuration. See SB Azalia Configuration .