manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 62 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 62

Functional Description

MITX-CORE-820 Installation and Use (6806800M10H)

61

4.9

WiFi/WiMax

The MITX-CORE-820 supports a PCI-Express Mini-Card 1.2 Dual Head to Head Socket designed 
to comply with the PCI-Express Mini-Card ElectroMechanical 1.2 Specification. The design 
supports a PCI-Express Display Mini-Card in place of the second half mini-card in the head to 
head socket design. The PCI-Express Mini-Card port is interoperable with the Intel WiMAX Link 
Advanced-N+ 6250 and WiFi Link Advanced-N 6200 Series wireless devices. The MITX-CORE-
820 supports PCI-Express, USB and SMbus to all PCI-Express full mini-card, half mini-card, and 
display mini-card sites. The MITX-CORE-820 supports one display port to the display mini-card 
site. 

4.10 Storage

The MITX-CORE-820 supports two SATA 3G and two SATA 6G ports with standard vertical data 
connectors. The SATA power connector provides suff3.3V, +5V, +12V power to 
accommodate both SSD and rotating-media drives of 1.8", 2.5" and 3.5" sizes. The MITX-CORE-
820 supports RAID 0, 1, 5, 10 across all SATA interfaces (MITX-CORE-820 only).

Table 4-8 SATA HDD Power Connector Pinout (P17)  

Pin

Signal

Pin

Signal

1

+V12S

2

GND

3

+V3.3S

4

GND

5

GND

6

+V5S

Figure 4-4

SATA HDD Power Connector (P17)

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments