manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 102 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 102

Chapter 6

MITX-CORE-820 Installation and Use (6806800M10H)

101

Firmware

6.1

Embedded Controller Overview

The embedded controller (EC) is an essential component in modern mobile, ultra-mobile and 
embedded computer systems. 

The Nuvoton keyboard controller and scanner firmware for the Nuvoton NPCE791x 
keyboard/embedded controller is compatible with the industry standard 8042 interface and 
can scan locally defined OEM keyboard matrix. It simultaneously supports a scanned keyboard, 
external keyboards, and PS/2 mice. Options are also available for battery charging and 
monitoring firmware. EC firmware is also fully functional in ACPI(SCI) or legacy environments.

In the MITX-CORE-820, the NPCE791C from Nuvoton was selected as the EC silicon. It provides 
the power sequence controller, PS2 KB/MS interface, battery management, 
thermal/temperature/fan speed control, serial port and LED controller.

The following diagram shows the system block of NPCE791x.

The NPCE791x is a highly integrated, embedded controller with an embedded RISC core and 
system functions. It targets a wide range of portable applications that use the Low Pin Count 
(LPC) interface and is designed to best meet the requirements of mobile systems.

Figure 6-1

NPCE791x System Block Diagram

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments