manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 28 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 28

MITX-CORE-820 Installation and Use (6806800M10H)

27

Sicherheitshinweise

Dieses Kapitel enthält Hinweise, die potentiell gefährlichen Prozeduren innerhalb dieses 
Handbuchs vorrangestellt sind. Beachten Sie unbedingt in allen Phasen des Betriebs, der 
Wartung und der Reparatur des Systems die Anweisungen, die diesen Hinweisen enthalten 
sind. Sie sollten außerdem alle anderen Vorsichtsmaßnahmen treffen, die für den Betrieb des 
Systems innerhalb Ihrer Betriebsumgebung notwendig sind. Wenn Sie diese 
Vorsichtsmaßnahmen oder Sicherheitshinweise, die an anderer Stelle diese Handbuchs 
enthalten sind, nicht beachten, kann das Verletzungen oder Schäden am System zur Folge 
haben.

Artesyn ist darauf bedacht, alle notwendigen Informationen zum Einbau und zum Umgang mit 
dem System in diesem Handbuch bereit zu stellen. Da es sich jedoch bei dem System um ein 
komplexes Produkt mit vielfältigen Einsatzmöglichkeiten handelt, können wir die 
Vollständigkeit der im Handbuch enthaltenen Informationen nicht garantieren. Falls Sie 
weitere Informationen benötigen sollten, wenden Sie sich bitte an die für Sie zuständige 
Geschäftsstelle von Artesyn.

Das Produkt erfüllt die für die Industrie geforderten Sicherheitsvorschriften und darf 
ausschließlich für Anwendungen in der Telekommunikationsindustrie, im Zusammenhang mit 
Industriesteuerungen und in der Entwicklung verwendet werden. Es darf nicht in 
sicherheitskritischen Anwendungen, lebenserhaltenden Geräten oder in Flugzeugen 
verwendet werden.

Einbau, Wartung und Betrieb dürfen nur von durch Artesyn ausgebildetem oder im Bereich 
Elektronik oder Elektrotechnik qualifiziertem Personal durchgeführt werden. Die in diesem 
Handbuch enthaltenen Informationen dienen ausschließlich dazu, das Wissen von 
Fachpersonal zu ergänzen, können dieses jedoch nicht ersetzen.

Halten Sie sich von stromführenden Leitungen innerhalb des Systems fern. Entfernen Sie auf 
keinen Fall die Systemabdeckung. Nur werksseitig zugelassenes Wartungspersonal oder 
anderweitig qualifiziertes Wartungspersonal darf die Systemabdeckung entfernen, um 
Systemkomponenten zu ersetzen oder andere Anpassungen vorzunehmen.

Installieren Sie keine Ersatzteile oder führen Sie keine unerlaubten Veränderungen am System 
durch, sonst verfällt die Garantie. Wenden Sie sich für Wartung oder Reparatur bitte an die für 
Sie zuständige Geschäftsstelle von Artesyn. So stellen Sie sicher, dass alle 
sicherheitsrelevanten Aspekte beachtet werden.

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments