Artesyn MITX-CORE-820 Installation And Use Manual Download Page 85

Page: 85 / 133

BIOS

MITX-CORE-820 Installation and Use (6806800M10H

)

5.4.2.2

Processor Configuration

5.4.2.3

Processor Power Management

Table 5-8 Processor Configuration Field Description

Field

Description

Active Processor Cores

Shows the number of cores to enabled in each processor
package.

Intel® HT Technology

When disabled, only one thread per enabled core is displayed.

CPU Flex Ratio Settings

This value must be between Max efficiency ratio and Max non-
turbo ratio.

Enabled XD

Enabled Execute Disabled functionality. Also known as Data
Execution Prevention (DEP).

Intel® Virtualization
Technology

When enabled, a VMM can utilize the additional hardware
capabilities.

Fast Boot Memory
Initialization

Enable this to reduce the amount of time spent initializing
memory during a cold boot.

Processor Power Management Processor power management configuration, see later

description.

Table 5-9 Processor Power Management Field Description

Field

Description

Intel® SpeedStep

™

Enables processor performance states (P-States).

Turbo Mode

Enables processor Turbo Mode. EMTTM must also be enabled.

C-States

Enables processor idle power saving states (C-States).

C3-State

Enables processor idle power saving C3 state.

C6-State

Enables processor idle power saving C6 state.

C7-State

Enables processor idle power saving C7 state.

Summary of Contents for MITX-CORE-820






































































































































Search results

Summary of Contents for MITX-CORE-820

Reviews:

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 85 / 133

Search results

Summary of Contents for MITX-CORE-820

Reviews: