Artesyn MITX-CORE-820 Installation And Use Manual Download Page 121

Page: 121 / 133

Firmware

MITX-CORE-820 Installation and Use (6806800M10H

)

120

6.3.6

Wake Up Requirement

The PS2 kb/mouse supports wake up from sleep state, in both S1/S3, but not S5.

6.3.7

LEDs Control

The MITX-CORE-820 has a green LED and a red LED to indicate the charging or discharging
status

A LED for indicating power on/off is implemented.

Table 6-10 LED Control Status

Battery Status

Green LED Status

Red LED Status

Charging

Inactive

Active

Fully Charged

Active

Inactive

Discharging

Inactive

Battery Low

Inactive

Blinking

const LEDs_DESCRIPTOR LEDs_Table[] =

{

{PORT_PIN(3, 2) | LOW, 0x00}, // 0 - Battery LED Green

{PORT_PIN(3, 1) | LOW, 0x00}, // 1 - Battery LED RED

{UNUSED_PIN | LOW, 0x00}, // 2 - Scroll Lock LED

{UNUSED_PIN | LOW, 0x00}, // 3 - CAPS Lock LED

{UNUSED_PIN | LOW, 0x00}, // 4 - NUMLock LED

{UNUSED_PIN | LOW, 0x00}, // 5 - Touchpad Disabled LED

{UNUSED_PIN | LOW, 0x00}, // 6 - Bluetooth LED

{UNUSED_PIN | LOW, 0x00}, // 7 - Wireless LED

{UNUSED_PIN | LOW, 0x31}, // 8 - Power LED

{UNUSED_PIN | LOW, 0x00} // 9 - 3G LED.

Summary of Contents for MITX-CORE-820






































































































































Search results

Summary of Contents for MITX-CORE-820

Reviews:

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 121 / 133

Search results

Summary of Contents for MITX-CORE-820

Reviews: