manualshive.com logo in svg

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 65 / 133

Share
Download
Artesyn MITX-CORE-820 Installation And Use Manual Download Page 65

Functional Description

MITX-CORE-820 Installation and Use (6806800M10H

)

64

4.12.1 Power Consumption

The following table lists the estimated maximum power consumption of MITX-CORE-820 in 
three states:

4.12.2 Power Sequencing Requirements

The power sequencing meets the PCH power sequencing requirements.

4.12.3 Power Management

The MITX-CORE-820 design is ACPI 4.0a compliant. System power states S0 (Power-on), S3 
(Suspend to RAM), S4 (Suspend to Disk), and S5 (Soft Off) is supported. Deep Sleep Sx is also 
supported after the option in BIOS setup is enabled. The board provides FET's to power off 
appropriate power planes.

Figure 4-7

ATX Power Supply Connector Top View

Table 4-12 Board MAX Power Consumption Estimation

State

Power Consumption

Configuration

Idle (CMOS Setup)

30W

SNB i7-2710QE, 2x 2G SODIMM

Idle (Windows XP Pro)

20W

Full Loading (TAT+3DMark)

70W

SNB i7-2710QE, 2x 4G SODIMM

Summary of Contents for MITX-CORE-820






































































































































Reviews:

No comments