Artesyn MITX-CORE-820 Installation And Use Manual Download Page 66

Page: 66 / 133

Functional Description

MITX-CORE-820 Installation and Use (6806800M10H)

4.12.4 Power Measurement

The MITX-CORE-820 design provides the ability to measure power consumption on DC-IN
supply rails.

4.13 Embedded Controller

The MITX-CORE-820 design implements a Nuvoton NPCE791C embedded controller. The
following sections list the functionality of the embedded controller, or EC.

4.13.1 Voltage Monitor

The MITX-CORE-820 design implements voltage monitoring capability on +V3A, +V5A and
+V1.5S rails. The ADC of EC can be used as voltage monitor.

4.13.2 Serial Port

EC implements one RS-232 compatible serial port on the rear IO. It has RXD, TXD, RTS#, CTS#
and RI# signals on the port.

Table 4-13 Serial Port Connectors (J5)

Signal

COM_RXD#

COM_TXD

GND

COM_RTS#

COM_CTS#

COM_RI#

Summary of Contents for MITX-CORE-820






































































































































Search results

Summary of Contents for MITX-CORE-820

Reviews:

Artesyn MITX-CORE-820, Installation And Use Manual, Page: 66 / 133

Search results

Summary of Contents for MITX-CORE-820

Reviews: