Arris ICX 7650-48P, Configuration Manual

Page: 69 / 245

Automatic copy to member units: 2 3 <-- System saves the configuration back to the stack members.
Flash Memory Write (8192 bytes per dot)
.
Copy Done.
Unit 2 Logs: <-- Unit 2 records stack formation activity. Unit 3 and any other stack units
record similar information.
===============
ICX7750-26Q Router# show config ========== > Should be empty
INFO: empty config data in the primary area, try to read from backup
INFO: empty config data in the backup area also
Unit 1 receives stack interactive-setup from U1, mac=cc4e.246d.9e00
ID=2 D0=2/1, D1=none, , will reload in 10 sec
Unmounting the External USB
We are in system resetSyncing file system
Rebooting...
Bootloader Version: 10.1.12T205 (Jun 06 2018 - 21:41:43)
SVR: 0x82100120, PVR: 0x80230032
!
.
.
.
After boot up unit 2 becomes standby:
================================
[MEMBER]local-2@ICX7750-26Q Router> <-- Notice the prompt change on stack unit 2. The prefix [MEMBER]
indicates that the device has joined a stack and no longer
operates independently.
Creating certificate, please wait...
SSL Client Certificate is successfully created
[MEMBER]local-2@ICX7750-26Q Router>
Power supply 1 detected.
Power supply 1 is up.
T=1m33.0: Election, was member, no change, ID=2, pri=0, 3U(1-3), A=u1, nbr#=2 0, reason: u1: port-up, ,
T=1m34.8: Election, was member, no change, ID=2, pri=0, 3U(1-3), A=u1, nbr#=2 0, reason: u1: stk-po-chg, ,
Unit 2 becomes ready
Connecting to active controller 1 console...(Press Ctrl Shift - x to exit)
Download request from active unit 1 mac = cc4e.246d.9e00
There is no startup config file, unable to save legacy config
Downloading - startup-config.txt
UNIT2:T=1m39.9: U2 received startup config flash sync.
Done.
ICX7750-48F Router>Download request from active unit 1 mac = cc4e.246d.9e00
Downloading - secondary.sig
stack done ssig key sync
Done.
Download request from active unit 1 mac = cc4e.246d.9e00
Downloading - bootrom.sig
stack done bsig key sync
Done.
UNIT2:T=2m46.3: Unit 2 is assigned standby by active u1.
T=2m49.5: Standby u2 start parsing running config from active controller u1
SZ swr host is set to swrqa.ruckuswireless.com
T=2m50.0: Standby u2 finished parsing running config from active controller u1.
UNIT2:Detect stack unit 3 has different ssl client key, will synchronize it
T:2m55.3: Done hot swap: standby controller u2 sets u3 to Ready.
UNIT2:Detect stack unit 1 has different ssl client key, will synchronize it
T:2m56.3: Done hot swap: standby controller u2 sets u1 to Ready.
Building a Stack
Stack construction methods
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01 69