Arris ICX 7650-48P, Configuration Manual

Page: 137 / 245

TABLE 24 ICX 7750 stacking capability (continued)
Stacking capability ICX 7750 Additional information
Stacking ports 12 total ports available simultaneously:
Six 40-Gbps ports, Module 2: 1/2/1 to 1/2/6
(Front)
and
Six 40-Gbps ports, Module 3: 1/3/1 to 1/3/6
(Rear)
Refer to "Valid-stack-port sets" in this table
for information on using Module 2 (right
front) and Module 3 (rear) simultaneously for
stacking.
Valid-stack-port sets There are 6 valid-stack-port sets:
(x/2/1, x/2/4, 3)
(x/3/1, x/3/4, 3)
(x/2/1, x/3/1, 6)
(x/2/5, x/2/6, 1)
(x/3/5, x/3/6, 1)
(x/2/5, x/3/5, 2)
NOTE
The third number in the set is the
maximum number of ports in a
stacking trunk. One indicates a
single stack-port only.
Refer to the definition of valid-stack-port set
in Stacking terminology on page 19 and Valid-
stack-port sets on page 23 for more
information.
Refer to
ICX 7750 stacking topologies on page
138 for port locations.
Reconfigurable ports Use the stack-port and stack-trunk
commands to reconfigure ports.
Trunks Up to two stack trunks
NOTE
Refer to Creating an ICX 7750
stacking link in a production
environment on page 147.
NOTE
To set up long-distance stacking
trunks on 48-port units, refer to
Installing the ICX 7750 in a remote
stack on page 143.
Refer to "Valid-stack-port sets" in this table
for common trunk configurations.
Linear-topology trunks The following maximum linear-topology
trunks are supported:
1/2/1 to 1/2/6 and 1/3/1 to 1/3/6
or
1/2/5 to 1/2/6 and 1/3/5 to 1/3/6
Refer to Support for two-unit stack linear-
topology trunks on page 36 for more
information.
Hitless switchover and hitless failover Supported Refer to Hitless stacking on page 171.
License requirements No license required for stack-port
configuration. No license required for
Premium features.
For more information on ICX 7750 license
options, refer to the Ruckus FastIron Software
Licensing Guide.
Configuration options Manual and automatic, including stack
interactive-setup and zero-touch provisioning
Refer to Stack construction methods on page
56.
Access methods TFTP, SCP Software images, boot images, and signatures
can be downloaded to a stack using TFTP and
SCP applications. Refer to the Ruckus FastIron
Software Upgrade Guide for more information.
Stacking by Device
ICX 7750 stack configuration overview
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01 137