ARRI K2.47050.0 Instruction Manual Download

Page: 22 / 119

3.5

Outputs

The HD-IVS has three HD-SDI outputs, one for video with text and graphic
overlay and one for video without text and graphic and one output

switchable between the two. The output is HD-SDI with 4:2:2 color
sampling. The HD-Link speed is selectable between 23.976, 24, 25, 29.97
and 30 FPS, the mode can be progressive, interlaced or segmented.

Additionally, the IVS has a DATA output for future use. However, at this
point, the software is not implemented.

3.6

HD-SDI Output Without Graphic Overlay

In the normal HD-SDI video output, marked
with the

symbol

→

Photo

, no graphic

information is inserted.

The outputs are standard BNC sockets for 75

terminated video signals. All outputs can

be used simultaneously.

In order to ensure appropriate
image quality, make sure to use

cables which are capable to
handle the 1.5 GB/s data rate of
the HD-SDI signal. We

recommend cables according to
RG 59 standard.

3.7

HD-SDI Output With Graphic Overlay

In the output HD-SDI with graphic overlay,
marked with the

symbol

→

Photo

, additional data such as frame

lines, camera status information, camera
system information and a user text line are

inserted.

The outputs are standard BNC sockets for 75

terminated video signals. All outputs can

be used simultaneously.

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands