ARRI K2.47050.0, Instruction Manual

Page: 71 / 119

71
see chapter 5.7.4 for a description on how to transfer images from the USB
stick into the internal memory.
Move the cursor by using the keys
Ê
and
Ë
to the line - VIEW MODE
→
Photo . Pressing the key
Í
will switch from LIVE to STORED to COMP and
back to LIVE. The key
Ì
will switch in the opposite direction.
If LIVE is selected, the actual image will be displayed. If STORED is
selected, an image, which was stored previously, will be displayed and if
COMP is selected, a live image and a stored image will be mixed to show
the difference between the images.
The stored image is available until a new image is stored or until the HD-
IVS power was shut down.
Please note that this setting is always in the LIVE mode after power up in
order to avoid a frozen image on the screen.
5.7.2 Store Image to Internal Memory
The HD-IVS can store an
image to its internal memory,
display that or overlay it
against the live image in front
of the camera to compare both
images. Parallel to pressing
the Enter/Insert key
Ñ
shortly (less than 1.5 seconds),
the STORE IMAGE command in
the on-screen program mode
will grab one particular image,
no matter of the selected
display mode. (Please see the
last chapter
5.7.1 View Mode
for information on different
display modes, e.g. Live, Store
and Compare).
Move the cursor by using the keys
Ê
and
Ë
to the line - STORE IMAGE
→
Photo . Pressing the key
Í
or
Ì
will store the image. The word
DONE
will
appear for a few seconds to show that an image was stored.
The stored image is available until a new image is stored or until the HD-
IVS power was shut down.