ARRI K2.47050.0 Instruction Manual Download

Page: 20 / 119

3.4

Installation of the ARRICAM ST

A 3 mm and a 1.5 mm hex key are used.

Take the view finder cover off the camera.

Take the adapter and the IVS lens cap off the HD IVS

Mounting the HD adapter to the ARRICAM ST view finder

To take the adapter off, a 3 mm

hex key is used. Remove the lens
cap.

→

Photo

To take the view finder cover off,

loosen the captive screw S1 with a
3 mm hex key and remove the
view finder cover.

→

Photo

To take the adapter off the HD
video assist, loosen the captive

screws S1 and S2 with a 3 mm hex
key. To have access to screw S2
use the hole as marked and
remove the adapter

→

Photo

Attach the adapter onto the
ARRICAM ST view finder and
tighten screw S1 and S2

→

Photo

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands