ARRI K2.47050.0 Instruction Manual Download

Page: 55 / 119

5.4.5

Manual Gain Increase/Decrease

Note: MANUAL GAIN

increase/decrease is only

available if MANUAL
GAIN control is on.

If MANUAL GAIN is on, it is
possible to adjust the gain
manually.

Move the cursor by using the
keys

and

to the line

– VALUE

→

Photo

. Pressing the

key

will increase the gain;

the key

will decrease it.

The range is from 0 (lowest
gain) to 63 (highest gain). If
the key

is pressed

briefly, the value changes by

one increment, if the key is
pressed longer, the value will
continue to change.

The LED on the keyboard will follow the changes which are made in this
menu and vice versa, if this setting is changed via the keyboard, the on-

screen menu will follow.

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands