ARRI K2.47050.0 Instruction Manual Download

Page: 102 / 119

102

This setting switches the insertion of PULL DOWN information ON and OFF
independently of other inserted data.

Move the cursor by using the
keys

and

to the line – PULL

DOWN

→

Photo

. The keys

switch the insertion on and

off.

Note: The insertion of the Time

Code/User Bit and Pull

Down window is only

visible if at least one of

the three items is ON.

5.11.4

Placement

Placement is only available if

at least one of the three items
Time Code, User Bits or Pull

Down is on.

Note: The Time Code window

can be positioned either

as lines on the screen

(LINE mode) or on the
right hand side of the
screen (BLOCK mode),
which is particularly
helpful if a 4:3 image is
used.

Move the cursor by using the
keys

and

to the line

- PLACEMENT

→

Photo

. Using

the keys

will change

the placement mode from LINE
to BLOCK and back.

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands