ARRI K2.47050.0 Instruction Manual Download Page 39

Page: 39 / 119

Using the on-screen menu

Check all settings on
the connected

monitor.

Parallel to the control via the

keyboard, the GGC value for
the iris can be switched on
and off via the on screen

menu.

Note: The IRIS setting is only

available if lenses
without the Lens Data

System are used as
described in the
chapter

5.10.2 Iris.

Enter the main menu by pressing the Enter/Insert key

for more than

three seconds. Go to sub menu CCG. Move the cursor by using keys

and

to the line – IRIS

→

Photo

. Pressing the key

will increment the iris

value by one f-stop. Pressing the key

will decrease the iris value by one

f-stop.

The LED on the keyboard will follow the changes which are made in this
menu and vice versa, if this setting is changed via the keyboard, the on-

screen menu will follow.

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands