ARRI K2.47050.0 Instruction Manual Download Page 48

Page: 48 / 119

5.3.3

Default

Note: After the function SET ALL SETTINGS TO DEFAULT was selected, all

settings are cleared. They cannot be recalled.

This menu recalls a default
setting of all values. Here it is
possible to change back to

factory settings for the HD-IVS.

Move the cursor by using the
keys

and

to the line - SET

ALL

→

Photo

. Pressing the key

recalls the default

values.

It is necessary to re-confirm
the reset, as all settings will be

cleared. This window will

appear with the cursor in the
line NO

→

Photo

. Pressing the

key

will cancel this

procedure.

To clear everything, move the cursor by using the keys

and

to the line

– YES

→

Photo

. Pressing the key

sets all settings to default.

If the cursor is in position EXIT and the key

is pressed, the HD-IVS

will return to the Load/Store menu without setting everything to default.

Summary of Contents for K2.47050.0
























































































































Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands

ARRI K2.47050.0, Instruction Manual

Search results

Summary of Contents for K2.47050.0

Reviews:

Related manuals for K2.47050.0

Brands by name

Popular brands