Chapter 1: Introduction
2X Series Installation Manual
5
Figure 2: Evacuation panel user interface
1. Supply LED
2. General Test LED
3. General Disable LED
4. General Fault LED
5. Alarm LED
6. LCD
7. Sounder Delay button and LED
8. Sounder Fault/Disabled/Test LED
9. Confirm button
10. All Output Groups Start/Stop Button and
LED
11. Programmable output group start/stop
buttons and LEDs
12. Jog dial and function buttons
13. Reset button and LED
14. Panel Silence button and LED
15. Sounder Start/Stop Button and LED
16. System Fault LED
17. Low Battery LED
18. Earth Fault LED
19. Supply Fault LED
20. Fire Protection Fault/Disabled/Test LED
21. Fire Protection Delay button and LED
22. Fire Protection On/Acknowledged button
and LED
23. Fire Routing Fault/Disabled/Test LED
24. Fire Routing Delay button and LED
25. Fire Routing On/Acknowledged button and
LED
See “Assigning an output group to a programmable button” on page 90 for more
information on configuring programmable buttons.
Summary of Contents for 2X Series
