Ariens Deluxe 30, Service Manual

Page: 59 / 74

EN – 55
Install Track
See Figure 137.
IMPORTANT: Tracks are directional and MUST be installed
with treads in the orientation shown in Figure 137.
1. Install track onto carriage assembly so bogie wheels
and track runner are seated in track center.
2. Reinstall track drive wheel. See Install Track Drive
Wheel on page 54.
3. Return unit to operating position.
4. Reconnect spark plug wire and fill fuel tank.
5. Adjust track tension. Refer to Operator’s Manual for
adjustment procedure.
IMPORTANT: Check all adjustments after first use.
BOGIE WHEEL REPLACEMENT
Model 921326
Remove Bogie Wheel
IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Place unit in service position. See Service Position on
page 7.
4. Remove track. See Remove Track on page 54.
5. Remove hex nut securing bogie wheel to track axle
and remove bogie wheel. See Figure 138.
Install Bogie Wheel
1. Install bogie wheel onto track axle and secure with hex
nut, but DO NOT overtighten.
IMPORTANT: Bogie wheel should spin freely.
2. Reinstall track. See Install Track on page 55.
3. Return unit to operating position.
4. Adjust track tension. Refer to Operator’s Manual for
adjustment procedure.
5. Reconnect spark plug wire.
IMPORTANT: Check all adjustments after first use.
Figure 137
1. Bogie Wheel
2. Track Runner
1
2
WARNING: AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Draining Fuel System on page 7.
Make sure unit is secure and will not tip.
Figure 138