Ariens Deluxe 30, Service Manual

Page: 48 / 74

EN – 44
5. Reinstall hex rod into chute gears and secure with
hairpin.
6. Reinstall chute gear cover and secure with tapping
screw.
7. Adjust discharge chute. Refer to Operator’s Manual
for adjustment procedure.
8. Reconnect spark plug wire.
IMPORTANT: Check all adjustments after first use.
Remove Actuation Gear
Models 921045, 921046, 921047, 921048, 921049,
921323, 921324, 921325
IMPORTANT:
Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
See Figure 105.
3. Remove hardware retaining chute gear cover to chute
pedestal and remove cover.
4. Remove spring clip from chute rotation rod and
remove rod from chute gears.
5. Remove hardware securing actuation gear bracket to
pedestal plate and remove bracket. See Figure 98.
See Figure 106.
6. Remove push nut from actuation gear and discard.
7. Remove actuation gear from actuation gear bracket.
8. Remove flat steel washer from actuation gear.
Remove Actuation Gear
Model 921326
IMPORTANT:
Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Remove chute rotation gear. See Remove Chute
Rotation Gear on page 42.
See Figure 107.
4. Remove actuation gear and two flat steel washers
from chute gear bracket.
Figure 105
1. Tapping Screw
2. Chute Gear Cover
3. Spring Clip
4. Chute Rotation Rod
1
2
4
3
Figure 106
1. Push Nut
2. Actuation Gear
1
2
Figure 107