EN – 29
7.
Remove hardware securing engine mount to frame.
8.
Remove J-clamp and chute deflector cable from
engine mount.
9.
Using a suitable lifting device or help from an adult
assistant, lift engine and tilt forward slightly to relieve
tension from belts. Remove belts from engine
sheaves.
10. Lower engine onto a flat, level surface.
11. Remove hardware securing attachment sheave to
crankshaft.
12. Remove attachment sheave, traction sheave and
nylon washer from crankshaft.
Install Engine
1.
Using a suitable lifting device or help from an adult
assistant, lift engine and lower onto bolts in frame.
2.
Position belts over crankshaft.
3.
Reinstall J-clamp to left rear engine mounting position.
4.
Secure engine mount to frame with four locking nuts.
Torque to 11.9 – 17.9 N•m (8.8 – 13.2 lb-ft).
5.
Reinstall traction sheave onto crankshaft.
6.
Reinstall traction drive belt onto traction sheave.
7.
Reinstall attachment sheave onto crankshaft.
IMPORTANT:
Traction sheave must be reinstalled in the
orientation shown in Figure 66.
WARNING:
AVOID INJURY. Engine is heavy.
NEVER lift engine without a suitable lifting device
or adult assistant.
Figure 64
Figure 65
WARNING:
AVOID INJURY. Engine is heavy.
NEVER lift engine without a suitable lifting device
or adult assistant.
Figure 66
