EN – 25
6.
Secure support brackets to auger housing with two
round head square neck bolts and two top locking
flange nuts. See Figure 53.
7.
Secure support bushings to auger housing with six
tapping screws. See Figure 54.
8.
Tighten three hex nuts retaining bearing plate.
9.
Apply a thin layer of anti-seize to impeller shaft end.
10. Reinstall spacer bushing onto impeller shaft end.
11. Reinstall attachment drive pulley onto impeller shaft
and secure with locking washer and hex bolt. Torque
to 7.9 – 16.5 N•m (5.8 – 12.2 lb-ft).
12. Reinstall housing to frame. See
13. Reconnect spark plug wire.
Figure 53
Figure 54
Figure 55
1. Spacer Bushing
2. Bearing Plate
