EN – 53
TRACK DRIVE WHEEL REPLACEMENT
Model 921326
Remove Track Drive Wheel
IMPORTANT:
Save all hardware for reinstallation.
1.
Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2.
Disconnect spark plug wire from engine.
3.
Place unit in service position. See
4.
Remove flange nuts from eye bolts around rear track
axle to release track tension. See Figure 133.
5.
Remove snap clip retaining track drive wheel to drive
axle and remove drive wheel.
IMPORTANT:
Be aware of key on axle ends. If key is
removed, reinstall key.
Figure 132
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Make sure unit is secure and will not tip.
Figure 133
