EN – 36
Remove Right Axle Bushing
IMPORTANT:
Save all hardware for reinstallation.
1.
Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2.
Disconnect spark plug wire from engine.
3.
Place unit in service position and remove bottom
cover. See
4.
Remove snap clips from axle ends and remove
wheels.
5.
Remove E-ring from axle end.
6.
Hold differential gear in place and remove axle from
differential.
IMPORTANT:
Two flat steel washers will fall when short
axle is removed.
7.
Hold differential gear and remove short axle.
8.
Remove differential gear.
9.
Remove hardware securing axle bushing to frame and
remove bushing. See Figure 82.
WARNING:
AVOID INJURY. Before placing unit
in service position, drain fuel from tank and fuel
system. See
Make sure unit is secure and will not tip.
Figure 80
Figure 81
Figure 82
