EN – 18
10. Remove friction disc assembly from unit.
See Figure 28.
11. Remove hardware securing friction disc to drive
carrier and remove friction disc.
Install Friction Disc
1.
Install friction disc to drive carrier with cup side
positioned toward drive carrier.
2.
Secure friction disc to drive carrier with three tapping
screws. Torque to 7 – 8 N•m (5 – 6 lb-ft).
See Figure 29.
3.
Reinstall friction disc assembly into shift fork so shift
fork bracket and flat steel washer are positioned
against shift fork as shown.
NOTICE:
Move shift fork left for easy access.
4.
Reinstall hex shaft through frame and friction disc
assembly.
See Figure 30.
5.
Reinstall sprocket into chain.
6.
Insert hex shaft through sprocket and into bearing on
right side of frame.
Figure 27
1. Friction Disc Assembly
2. Hex Shaft
3. Sprocket
4. Chain
1
2
3
4
Figure 28
1. Friction Disc
2. Drive Carrier
3. Tapping Screw
1
2
3
Figure 29
1. Shift Fork
2. Flat Steel Washer
3. Shift Fork Bracket
4. Friction Disc Assembly
5. Hex Shaft
1
2
4
3
5