Argox G Series, User Manual

Page: 20 / 75

20
Peel Off Mode
Follow the co
mmon procedure of “ Loading Media “ of Standard
Mode from step 1 to 3.
4.
Remove approximately 6” long labels from the label backing
paper ( Figure 11 )
5. Lead the backing paper through the print head module.
( Figure 12 )
6. Turn back under the print head module. ( Figure 13 )
7. Use a sticker to fix the media on the rewinder kit.( Figure 14 )
8. Turn the rewinder kit twice to ensure the media is firmly fixed.
( Figure 15 )
9. Close the side access door and turn on the printer or press the
FEED button if the printer is already on. ( Figure 16 )
Note:
1.
The “ FEED “ button will not drive the printer to peel. The
peeling work can be executed only when (1 ) the software
setting is ready; (2) Bit 5 of DIP switch at real panel must be
set to ON position.
2. Please sure the peeler sensor is out of ribbon
path when it’s
installed.