Argox G Series, User Manual

Page: 30 / 75

30
Buttons
There are three buttons, each with two basic functions.
Button Function 1
(Press the button)
Function 2
(Press the button and
power switch together)
FEED Feed a label. Perform self test & print
configuration report.
PAUSE

Pause printing.

Press again to resume
printing.
Perform a media
calibration.
CANCEL

Interrupt and delete a
print task.

Force printer to continue
working after an error is
solved.
Reset the settings in
E
2
PROM.
Notes:
1.
It’s suggested to perform a “media calibration”
- at the first time installation.
- after changing to different types or sizes of media.
2.
After calibration the printer will save the related parameters
(reflection characteristics, label length, etc.) to E2PROM.
Without correct calibration the gap detection is easily lost
during printing especially for small labels (less than 1.5 inches
in height).
3.
Before calibration, the media and ribbon must be loaded
properly and move the label sensor to correct position.