Argox G Series, User Manual

Page: 12 / 75

12
Loading Ribbon
Notes:
1. This section is applicable to transfer thermal printing.
2. Attached ribbon is with coated side in.
1. Lift the top access door and the front access door to expose the
compartment. ( Figure 1 )
2. Push the head latch by anti-clockwise, and then fold the
bracket. ( Figure 2 )
3. Unwrap the ribbon roll pack and separate the ribbon roll and
the bare core.
4. Insert the ribbon roll into the ribbon supply spindle. ( Figure 3 )
5. Lead the bare core through the print head module. ( Figure 4 )
6. Attach the edge of the ribbon on the bare core and wind it a
little bit onto the core.
Note:
The coated side of the ribbon should be faced down.
7. Insert the bare core into the ribbon pick-up spindle. ( Figure 5 )
8. Turn the pick-up spindle to ensure the ribbon is tightly wound.