Argox G Series, User Manual, Page: 55 / 75

55
Printer Status
LCD Display Blinking
LED
Description
PAUSE READY
Printer is paused. Press PAUSE or
CANCEL to return to normal operation
mode.
MEDIA OUT MEDIA
READY
Media is uninstalled or used up. Load new
media to the printer.
RIBBON OUT RIBBON
READY
Ribbon is uninstalled or end-of-ribbon
occurred. Load new ribbon to the printer.
If you print in direct thermal mode, printing
without ribbon, set bit 1 of DIP Switch to
“OFF” position.
SERIAL IO
ERROR
READY
Format or baud rate of RS232
communication is inconsistent between
printer and host.
CUTTER FAILED READY Cutter cannot cut off the media, check
media and cutter.
MEMORY FULL READY Printer buffer full due to loaded soft fonts,
graphics or forms. Check data format. Call
for service.
HEAD OPEN
READY
Print head latch is not closed. To make
printer print labels normally, the head latch
must be closed.
P. SENSOR O.R. READY Media sensor is out of detection range
during calibration. Make sure media is
installed and the label sensor locates under
media properly.