Argox G Series, User Manual

Page: 16 / 75

16
Loading Media
G-6000 printer can be operated in three different options:
standard, peel-off, or with a cutter.
■ Standard mode allows you to collect each label freely.
■ In peel-off mode, the backing material is being peeled away
from the label as it is printed. After the former label is removed,
the next one will be printed.
■ In cutter mode, the printer automatically cuts the label after it
is printed.
Standard Mode
1. Insert the media roll into the media supply spindle and move
the media guide to the inside. ( Figure 6 )
2. Push the head latch by anti-clockwise, and then fold the
bracket. ( Figure 7 )
3. Remove the outside media guide. ( Figure 8 )
4. Lead the Media through the print head module and under the
paper sensor guide.
5. Put back the outside media guide, close the bracket, and
buckle the head latch. ( Figure 9 )
6. Close the top access door and the front access door and then
turn on the printer or press the “FEED” button if the printer is
already on ( Figure 10 )