Argox G Series, User Manual, Page: 35 / 75

35
Printer LCD function settings and parameters:
Item Range Factory
Default
Remarks
CUT/PEEL
POS (mm) -15 ~ 15 mm 0 mm Controls cut and
peeling position.
PRINT
OFFSET
(mm) -8 ~ 15 mm 0 mm Controls vertical
print position.
Positive value only.
TPH VER
OFFS (mm) -3 ~ 3 mm 0 mm Offset of vertical
print position.
RECOVERY
PRINT ENABLED,
DISABLED ENABLED Contents reprint
after media-out or
ribbon-out.
WIN CON
LEN (mm) 0 ~ 254 mm 0 mm This takes effect
only when you
install under
Windows with
bundled printer
driver and use
continuous media.
COUNTER
ON LCD ENABLED,
DISABLED ENABLED
MEDIA
SENS. TYPE REFLECTIVE
SEE-THROUGH REFLECTIVE Select the proper
type by the media
characteristics.
Once you change it,
make sure to make
calibration before
printing.
BACK FEED DISABLED,
ENABLED
DISABLED
BACK
DISTANCE
(mm) 10~40 mm 0 mm This item appears
only when
BACKFEED is