Argox G Series, User Manual

Page: 39 / 75

39
DIP switch
You may configure the printer by setting DIP switches. Once
the setting is changed, please restart the printer by turning
the power OFF then turn ON again.
Switch
No.
Position
ON OFF
Function
1
ON
Thermal transfer printing mode. Ribbon
detection is enabled.
OFF
Direct printing mode. Ribbon detection is
disabled.
2
ON Alternate (printable) control code set.
OFF Standard control code set.
3
ON Cutter is installed.
OFF Cutter is not installed.
4
ON The media gap height is more than 4mm.
OFF Media with normal gap or continuous paper
5
ON Dispenser is installed.
OFF Dispenser is not installed.
6, 7, 8
OFF, OFF, OFF Serial port speed = 9600 bps
ON, OFF, OFF Serial port speed = 2400 bps
OFF, ON, OFF Serial port speed = 4800 bps
ON, ON, OFF Serial port speed = 19200 bps
OFF, OFF, ON Serial port speed = 38400 bps
ON, ON, ON
Serial port speed = 9600 bps and for bar code
reader.