P225/EN CM/B11
Maintenance
Page 6/18
MiCOM P225
•
While the MiCOM relay is in Maintenance mode:
−
All protective functions are disabled
−
All automation functions are disabled
−
All output relays are off (including the watchdog relay)
−
The ALARM LED flashes
−
The MAINTENANCE MODE alarm appears
−
Communication via RS232 and/or RS485 ports is once more available.
•
When the MiCOM relay is in Maintenance mode:
−
A remote control signal is used to energise the required output relays
−
Another remote control signal must be sent to de-energise the output relays.
•
Once the output relay tests are completed, reset the MiCOM relays to normal
operation mode
−
by using the MiCOM S1 software, or
−
via the RS485 communication port.
3.3.2
Testing the output relays
Connect a continuity tester across the terminals of each output contact to check the correct
contact position (open/closed circuit) as in the table below.
The state of each output relay (1: energised/0: standby) is given in the "OP. PARAMETERS"
menu.
Output relay on standby
Output relay energised
OUTPUT
RELAY
Normally closed
Normally open
Circuit open
Circuit closed
WD
(watchdog)
36-37 36-35 36-37 36-35
RL1
2-4 2-6 2-4 2-6
RL2
8-10 8-12 8-10 8-12
RL3
14-16 14-18 14-16 14-18
RL4
1-3 1-5 1-3 1-5
RL5
7-9 7-11
7-9 7-11
Summary of Contents for MiCOM P225
