Areva MiCOM P225, Technical Manual

Page: 111 / 288

Menu of the HMI P225/EN HI/B11
MiCOM P225 Page 1/48
CONTENT
1. THE OP. PARAMETERS MENU 3
2. THE CONFIGURATION MENU 4
2.1 The CONFIG. SELECT submenu 4
2.2 The CT/VT RATIO submenu 5
2.3 The LED submenus 6
2.4 The ALARM CONFIG. submenu 8
2.5 The INPUT CONFIG. submenu 9
3. THE MEASUREMENTS 1 & MEASUREMENTS 2 SUBMENUS 10
4. THE PROCESS MENU 12
5. THE TRIP STATISTICS MENU 13
6. THE COMMUNICATION MENU 14
7. THE PROTECTION G1 AND G2 MENUS 15
7.1 The [49] THERMAL OVERLOAD submenu 15
7.2 The [50/51] SHORT-CIRCUIT submenu 16
7.3 The [50N/51N] EARTH FAULT submenu 17
7.4 The [46] UNBALANCE submenu 18
7.5 The [27] UNDERVOLTAGE submenu 19
7.6 The [59] OVERVOLTAGE submenu 20
7.7 The [48] EXCES LONG START submenu 21
7.8 The [51LR/50S] BLOCK ROTOR submenu 22
7.9 The [37] LOSS OF LOAD submenu 23
7.10 The [49/38] RTD submenu 24
7.11 The [49] THERMISTOR submenu 25
8. THE AUTOMAT. CTRL MENU 26
8.1 The [66] START NUMBER submenu 26
8.2 The MIN TIME BETW 2 START submenu 27
8.3 The REACCEL AUTHORIZ submenu 28
8.4 The INPUTS submenu 29
8.5 The AND LOGIC EQUAT submenu 30
8.6 The AND LOGIC EQUAT T DELAY submenu 32
8.7 The AUX OUTPUT RLY submenu 33
8.8 The LATCH AUX OUTPUT RLY submenu 36
8.9 The TRIP OUTPUT RLY submenu 37