Areva MiCOM P225, Technical Manual

Page: 217 / 288

Communication P225/EN CT/B11
MiCOM P225 Page 37/52
CODE DESCRIPTION
F6
Unsigned long : Trip output relay assignment (RL1)
bit 0 : tI>>
bit 1 : tI0>
Bit 2 : tI0>>
Bit 3 : tI2>
Bit 4 : tI< (loss of load)
Bit 5 : THERM OVERLOAD (Thermal overload)
Bit 6 : EXCES LONG START (Excessive long start)
Bit 7 : t Istall (Stalled rotor whilst running)
Bit 8 : LOCKED ROTOR (locked rotor at start)
Bit 9 : t RTD1 TRIP or Thermist1
Bit 10 : t RTD2 TRIP or Thermist2
Bit 11 : t RTD3 TRIP or Thermist3
Bit 12 : t RTD4 TRIP
Bit 13 : t RTD5 TRIP
Bit 14 : t RTD6 TRIP
Bit 15 : t RTD 10 TRIP
F6’ Bit 0 : t I2>>
Bit 1 : EXT 1
Bit 2 : EXT 2
Bit 3 : Equation A (« AND » logical gate A)
Bit 4 : Equation B (« AND » logical gate B)
Bit 5 : Equation C (« AND » logical gate C)
Bit 6 : Equation D (« AND » logical gate D)
Bit 7 : t RTD7 TRIP
Bit 8 : t RTD8 TRIP
Bit 9 : t RTD9 TRIP
Bit 10 : t V<
Bit 11 : VOLTAGE DIP
Bit 12 : t V>
Bits 13 to 15 : reserved
F7
Unsigned integer : Data transmitted on the analogue outputs
0 : I
A
RMS
1 : I
B
RMS
2 : I
C
RMS
3 : I
N
RMS
4 : THERM ST (thermal state)
5 : % I LOAD (load in % of full load current)
6 : Tbef START (time before a permitted start)
7 : Tbef TRIP (time before a thermal trip)
8 : V AC RMS (phase A–phase C voltage)
9 : POWER FACT
10 : WATTs
11 : VARs
12 : T°C RTD1
13 : T°C RTD2
14 : T°C RTD3
15 : T°C RTD4
16 : T°C RTD5
17 : T°C RTD6
18 : T°C RTD7
19 : T°C RTD8
20 : T°C RTD9
21 : T°C RTD10
22 : No Hottest RTD
F8 Unsigned integer : Latching of the trip output relay (RL1)
Bit 0 : tI>>
Bit 1 : tI0>
Bit 2 : tI0>>
Bit 3 : tI2>
Bit 4 : tI<
Bit 5 : THERM OVERLOAD (Thermal overload)
Bit 6 : EXCES LONG START (Excessive long start)
Bit 7 : t Istall (Stalled rotor whilst running)