Areva MiCOM P225, Technical Manual

Page: 113 / 288

Menu of the HMI P225/EN HI/B11
MiCOM P225 Page 3/48
1. THE OP. PARAMETERS MENU
OP. PARAMETERS
Press the ! and " keys to move around in the OP
PARAMETERS menu.
PASSWORD =
* * * *
Modification of the password : key in the old password
and confirm it. Then press the
#
key, key in the new
password and confirm the whole input with the
#
key.
The message NEW PASSWORD OK is displayed to
indicate that the password has changed.
DESCRIPTION =
P225
Displays the model of MiCOM relay.
REFERENCE =
XXXX
Displays your reference code. It contains letters between
A and Z. To enter it, press the
# key for each letter and
use the
!
and
"
to move forwards and backwards in
the alphabet. After each letter, press the $ key to enter
the next letter. At the end of the input, press the # key
to confirm your reference code.
SOFTWARE VERSION =
3.C
Displays the software version code.
FREQUENCY =
50
Hz
Acquisition of the reference frequency of the electrical
power system. There is a choice of : 50 Hz or 60 Hz.
ACTIVE SETTING =
GROUP 1
Displays the active setting group number :
1 : PROTECTION Group 1 active
2 : PROTECTION Group 2 active
INPUTS 6 5 4 3 2 1
ST = 0 0 0 0 0 0
Displays the state of the 6 binary inputs. The binary
inputs are numbered from 1 to 6 starting from the right.
The state of each binary input is displayed immediately
below :
- state 0 : input inactive
- state 1 : input active
OUTPUTS 5 4 3 2 1
ST = 0 0 0 0 0
Displays the state of the output relays. The output relays
are numbered from 1 to 5 starting from the right. The
status of each output relay is displayed immediately
below :
- state 0 : output inactive
- state 1 : output active
DATE
14/09/00
Selection and display of the date.
TIME
16:35:30
Selection and display of the time.