Areva MiCOM P225, Technical Manual

Page: 218 / 288

P225/EN CT/B11 Communication
Page 38/52 MiCOM P225
CODE DESCRIPTION
Bit 8 : LOCKED ROTOR (locked rotor at start)
Bit 9 : t RTD1 TRIP or Thermist1
Bit 10 : t RTD2 TRIP or Thermist2
Bit 11 : t RTD3 TRIP or Thermist3
Bit 12 : t RTD4 TRIP
Bit 13 : t RTD5 TRIP
Bit 14 : t RTD6 TRIP
Bit 15 : t RTD 10 TRIP
F8’ Bit 0 : t I2>>
Bit 1 : EXT 1
Bit 2 : EXT 2
Bit 3 : Equation A (« AND » logical gate A)
Bit 4 : Equation B (« AND » logical gate B)
Bit 5 : Equation C (« AND » logical gate C)
Bit 6 : Equation D (« AND » logical gate D)
Bit 7 : t RTD7 TRIP
Bit 8 : t RTD8 TRIP
Bit 9 : t RTD9 TRIP
Bit 10 : t V<
Bit 11 : VOLTAGE DIP
Bit 12 : t V>
Bits 13 to 15 : reserved
F9 Unsigned integer : Remote control word 1
Bit 0 : Remote delocking of the trip output relay (RL1)
Bit 1 : Remote alarm acknowledgement
Bit 2 : Remote TRIP ORDER
Bit 3 : Remote CLOSE ORDER
Bit 4 : Remote EMERGENCY START
Bit 5 : Remote order to change of active setting group
Bit 6 : Remote ORDER 1
Bit 7 : Remote ORDER 2
Bit 8 : Remote trigging of disturbance record
Bit 9 : Remote maintenance mode enabling order
Bit 10 : Remote maintenance mode disabling order
Bit 11 : Remote thermal state value reset
Bit 12 : Non automatic event/fault record acknowledgement on record retrieval
Bit 13 : Remote acknowledgement of the oldest non-acknowledged event record
Bit 14 : Remote acknowledgement of the oldest non-acknowledged fault record
Bit 15 : Remote acknowledgement of the « RAM memory error » alarm
F9’ Unsigned integer : Remote control word 3
Bit 0 to 1 : Reserved
Bit 2 : Remote acknowledgement of the oldest non-acknowledged disturbance record
F10 ASCII characters
32 –127 = ASCII character1
32 – 127 = ASCII character 2
F11 Longer integer : numerical data – 2 147 483 648 to + 2 147 483 647
F12 Unsigned integer : Logic inputs status
Bit 0 : Logic input 1 (CB/contactor status : 52a)
Bit 1 : Logic input 2
Bit 2 : Logic input 3
Bit 3 : Logic input 4
Bit 4 : Logic input 5
Bit 5 : Logic input 6
F13 Unsigned integer : Output relays status
Bit 0 : Output relay 1 (trip output relay)
Bit 1 : Output relay 2
Bit 2 : Output relay 3
Bit 3 : Output relay 4
Bit 4 : Output relay 5
Bit 5 : Watchdog relay