Areva MiCOM P225, Technical Manual

Page: 219 / 288

Communication P225/EN CT/B11
MiCOM P225 Page 39/52
CODE DESCRIPTION
F14
Unsigned integer : Auxiliary output relays allocation
Bit 0 : Allocation to relay 2
Bit 1 : Allocation to relay 3
Bit 2 : Allocation to relay 4
Bit 3 : Allocation to relay 5
Bits 4 to 15 : reserved
F14’ Unsigned integer : « AND » logical gates allocation
Bit 0 : Allocation to equation A
Bit 1 : Allocation to equation B
Bit 2 : Allocation to equation C
Bit 3 : Allocation to equation D
Bits 4 to 15 : reserved
F15 Unsigned integer :Logic inputs allocation.
Bit 0 : EMERG ST (emergency start)
Bit 1 : SET GROUP (change from one protection setting group to another)
Bit 2 : SPEED SW (speed switch – locked rotor detection at start-up)
Bit 3 : DIST TRIG (trigging of a disturbance recording)
Bit 4 : EXT RESET (external reset)
Bit 5 : EXT 1 (auxiliary 1 timer)
Bit 6 : EXT 2 (auxiliary 2 timer)
Bit 7 : EXT 3 (auxiliary 3 timer)
Bit 8 : EXT 4 (auxiliary 4 timer)
Bit 9 :
θ
RESET (thermal state value reset)
Bit 10 : TRIP CIRC (trip circuit wiring supervision)
Bits 11 to 15 : reserved
F16 Unsigned integer : Earth fault and unbalance protection information
Bits 0 to 4: reserved
Bit 5 : Instantaneous signal (I0> or I0>>)
bit 6 : Time delayed signal (tI0> or tI0>> or tI2> or tI2>>)
Bits 7 to 15 : reserved
F17 Unsigned integer : Short-circuit and loss of load protection information
Bit 0 : Any phase, overshoot of the I>> threshold signal or VOLTAGE DIP signal
Bit 1 : Phase A signal , overshoot of the I>> threshold
Bit 2 : Phase B signal, overshoot of the I>> threshold
Bit 3 : Phase C signal, overshoot of the I>> threshold
Bit 4 : reserved
Bit 5 : Instantaneous signal I>> or V< or V>
Bit 6 : Time delayed signal tI>> or tI< or tV< or tV>
Bits 7 à 15 : reserved
F18 Unsigned integer : Analogue output type
0 : 4-20 mA
1 : 0-20 mA