manualshive.com logo in svg

Arcus-EDS 65001002, Manual, Page: 9 / 46

Share
Download
Arcus-EDS 65001002 Manual Download Page 9

Domestic Ventilation with Heat Recovery
KNX-LUNOS-CONTROL4

Subject to change

Arcus-EDS GmbH
www.arcus-eds.de

Rigaer Str. 88 10247 Berlin 
[email protected]

Tel.: +49(0)30 25933914
Fax.: +49(0)30 25933915

682x-Lunos-Control-4F

V.13.09.2022

e1

Building protection
Intense ventilation
Temperature reduction
Silence mode
Determines which operating mode is selected with object 3.
Default: Intense ventilation

Running time [min] ( For operating mode 1 )

0 .. 240 Time control Object 3:
After 1 .. 240 minutes, the control goes back to the default operation.
0 means without automatic timeout

Operation mode 2

Comfort
Standby
Eco/Night
Building protection
Intense ventilation
Temperature reduction
Silence mode
Determines which operating mode is selected with object 4.
Default: Silence mode

Running time [min] ( For operating mode 1 )

0 .. 240 Time control Object 4:
After 1 .. 240 minutes, the control goes back to the default operation.
0 means without automatic timeout

Operation mode 3

Comfort
Standby
Eco/Night
Building protection
Intense ventilation
Temperature reduction
Silence mode
Determines which operating mode is selected with object 5.
Default: Intense ventilation

Running time [min] ( For operating mode 1 )

0 .. 240 Time control Object 5:
After 1 .. 240 minutes, the control goes back to the default operation.
0 means without automatic timeout

Summary of Contents for 65001002















































Reviews:

No comments