32
DE246A
13. Remove the governor control spool, thrust bearing,
and thrust washer keeping all components in order of
disassembly.
DE278A
14. Remove the camshaft end cover; then gently slide
the camshaft toward the flywheel end of the engine.
Rotate the camshaft slightly to prevent binding and
hanging in the camshaft bores. Account for the fuel
pump eccentric bushing.
DE297A
DE299A
Inspecting
1. Thoroughly clean the camshaft in parts-cleaning sol-
vent; then dry with compressed air.
2. Inspect each camshaft journal for scoring, heat dis-
coloring, or pitting.
DE298A
3. Inspect all camshaft lobes for scoring, galling, flak-
ing, or pitting.
DE298B
4. Inspect the fuel lift pump eccentric and bushing for
excessive wear, scoring, or pitting.
CAUTION
Make sure to support the camshaft while the journals
are pulled clear of the journal bores or damage to jour-
nal bores may occur.
! WARNING
Always wear safety glasses when working with com-
pressed air.
Manual
Table of Contents
