Arctic Cat 660 cc, Service Manual, Page: 39 / 396

2-27
2
MD1514
MD1515
„
NOTE: Because the intake and exhaust cam-
shafts and all camshaft caps are unique, it is rec-
ommended that the technician make note of the
location for assembling purposes.
32. Remove the camshaft cap retaining cap screws and
camshaft caps; then remove the camshafts.
Account for the dowel pins.
MD1522
33. Starting with the inside rows using a 10 mm 12
point socket, remove the eight cylinder head cap
screws; then remove the cylinder head. Account
for the two dowel pins and discard the gasket.
„
NOTE: Always install a new head gasket.
„
NOTE: Care should be taken not to tip the cylin-
der head upside down or the shim buckets and
shims will fall out.
MD1530
„
NOTE: Because the connecting rods and con-
necting rod caps are unique, it is recommended
that the technician mark them and keep all associ-
ated parts together for assembling purposes.
AO211
34. Remove the two connecting rod cap nuts from one
of the connecting rods; then remove the
connecting rod cap. Account for two connecting
rod bearings.
MD1542