Arctic Cat 660 cc, Service Manual

Page: 326 / 396

9-53
9
FC185
9. Secure the outer idler wheel mounting block with
the cap screw and lock nut. Tighten to 5.5 kg-m
(40 ft-lb).
AG686D
10. Secure the outer and inner idler wheels to the
mounting blocks with existing hardware. Tighten
to 5.5 kg-m (40 ft-lb).
FC151
11. Secure the crossbraces with cap screws (coated
with blue Loctite #243). Tighten to 6.9 kg-m
(50 ft-lb).
FS051
„
NOTE: Apply a light coat of grease to the slide
rail surface to aid in installing a new wear strip. If
there are any sharp edges on the lower portion of
the rail, use a file to remove them.
AG534D
12. From the back, start the wear strip onto the rail;
then using a block of wood and a hammer, drive
the wear strip forward into position. Secure with a
machine screw and lock nut. Tighten to 1.1 kg-m
(8 ft-lb).
AG535D