43
TR168
6. Look for any signs of metal particles on the rotor/fly-
wheel which might indicate internal parts failure.
TR147A
7. Inspect the rotor/flywheel for cracks, loose rivets, or
worn keyway.
TR146A
Installing Right-Side
Components
NOTE: When assembling components, always use
new gaskets, O-rings, and seals. Coat all moving
parts with fresh, clean engine oil.
1. Install the oil pump assembly into the crankcase
making sure the arrow is directed upward; then
secure with the two cap screws and tighten to 7 ft-lb.
TR104A
TR182
2. Install a square key into the crankshaft; then install
the crankshaft drive gear onto the crankshaft.
TR183
TR184
3. Install a spacer and square key on the balancer shaft;
then align the timing mark on the balancer driven
gear to the timing mark on the drive gear and slide
the driven gear into place.
