Arbiter Systems 1092A, Operation Manual

Page: 213 / 214

INDEX 195
broadcast Year + ASCII, 73
broadcast, interrogate, 71
clear event buffer, 76
custom string, return, 66
DST/Summertime
activate, 80
return settings, 80
start time, 80
stop time, 81
enable front panel, 81
Event
channel time, 76
return deviation, 76
Event number, 76
front panel, disable control panel, 81
Local Offset, 81
lock setup keys, 81
Option 28
commands, 122
return System status, 123
return time, freq, dev, UTC, 126
set deviation, 126
set phase calibration, 126
set System time as Local, 123
set System time as UTC, 123
set voltage correction, 126
start Broadcast ASCII, 124
start Broadcast Vorne, 123
system frequency, 122
system frequency deviation, 122
system phase, 122
system time, 123
system time deviation, 122
out-of-lock alarm
set time, 87
Prog Pulse
pulse polarity, 87
set pulse width, 86
set time mark, 86
Pulse Per Hour, 86
Return
IP/MAC address, 89
return
display buffer, 88
elevation, 83
firmware version, 88
latitude, 83
local date, 85
local time, 85
longitude, 83
Seconds per Pulse, 86
Set deviation operation, 76, 77
Set event operation, 76
set IEEE 1344 mode, 82
set local time, 82
set receiver time, 85
set UTC time, 82
Status
clock, 78
EEPROM, 78
receiver, 78
status of event/deviation, 77
survey, 79
system, 79
time quality, 80
survey mode, 84
serial port
output symbols, 66
pin definitions, 89
Set Auto Survey?, 48
Set Back Light?, 40
Set Event/Deviation?, 47
Set IRIG Time Data?, 47
Set Local Hour?, 37
Set Main RS-232?, 35
Set Option Control?, 50
Set Out-of-Lock?, 39
set position commands, 84
Set Position Hold?, 49
Set Prog. Pulse?, 41
Set System Delays?, 40
settings
firmware
default, 34
setup menus, see configure settings
signal
output
description, 52
SNTP, see NTP Server
solid-state relays, 129
startup sequence, 27
Statement of Compliance, 163