6
6.
WIRING CONNECTIONS
• Use only the cables provided with the ARAG computers.
• Take care not to break, pull, tear or cut the cables.
• Use of unsuitable cables not provided by ARAG automatically voids the warranty.
• ARAG is not liable for damages to the equipment, persons or animals caused by failure to observe the above instructions.
6.1
General precautions for a correct harness position
• Securing the cables:
- secure the harness so that it does not interfere with moving parts;
- route the harnesses so that they cannot be damaged or broken by machine movements or twisting.
6.2
Sensor connection
Fix the connectors to the relevant functions according to the initials indicated in your assembly general diagram (par.
5.4
).
Use ARAG sensors: use of unsuitable sensors not provided by ARAG automatically voids the warranty.
ARAG is not liable for damage to the equipment, persons or animals caused by failure to observe the above instructions.
6.3
Connection to the multi flowmeters
Upon installation, pay the utmost attention to the sequence according to which the flowmeters are connected for the first time.
THE CONNECTION MUST BE CARRIED OUT FROM THE TEST MENU SCREEN.
Installation
Multiflow
Multiflow 1
Multiflow 2
Access the Installation menu (Settings menu > Tests > Sensors > Multiflowmeters).
Upon first sensor connection, number
1 will light up under the installation
message.
Each connected multiple flowmeter will
take an increasing numbering, up to a
maximum of 4.
A range of information can be obtained for each multiple flowmeter, hence for each single channel ("Multi flowmeters test" on page 26).
Summary of Contents for VISIO MULTIFLOW 4670611
