26
10.5.2
External activation test
Sensors
Speed sensor
External enable
...
Multiflow
The display shows the current external activation been in use.
10.5.3
Multi flowmeters test
This menu allows to get information about each multi flowmeter and the corresponding flowmeters.
Sensors
Speed sensor
External enable
Multiflow
...
Open Multi flowmeters test menu (Setup menu > Test > Sensors > Multi flowmeters).
Press
OK
to perform the test.
Installation
Multiflow
Multiflow 1
Multiflow 2
1) Select through
key.
2) Press
ESC
to quit.
Status
Multiflow 1
Power voltage
Temperatura
...
For each multi flowmeter installed, the following information may be checked:
-
Status;
-
Power supply voltage;
-
Temperature;
-
Flowmeter 1;
-
Flowmeter 2;
-
Flowmeter 3;
-
Flowmeter 4;
Use
to scroll the information to be displayed.
Flowrate
Flowmeter 1
Status code
Error code
...
For each row of the flowmeter (Flowmeter 1,2,3,4) you can also check:
Flowrate
,
Status
code
and
Error code
.
Use
to scroll the information to be displayed.
Status code
Error code
0 measurement disabled
1
wrong calibration
1
measurement enabled,
liquid not flowing
2
liquid not detected
2 measurement enabled, liquid flowing
4
wrong power supply
3 measurement suspended / device busy
8
overtemperature
Summary of Contents for VISIO MULTIFLOW 4670611
