ARAG VISIO MULTIFLOW 4670611, Installation, Use And Maintenance Manual

Page: 27 / 32

27
11. MAINTENANCE / DIAGNOSTICS / REPAIRS
• Clean only with a soft wet cloth.
• Do not use aggressive detergents or products.
• Do not clean equipment with direct water jets.
11.1 Troubleshooting
FAULT CAUSE REMEDY
VISIO MULTIFLOW is off or does
not switch on
No power supply Check power cable connections
Device is OFF Press the ON key
VISIO MULTIFLOW shows
wrong data
Wrong setup Check displayed data setup
Sensor fault
Contact the nearest Assistance Center
VISIO MULTIFLOW fault
12. TECHNICAL DATA
Description
VISIO MULTIFLOW
Display Graphic LCD, 128 x 64 pixels, back-lighting
Power supply voltage 9 ÷ 16 Vdc
Protection against short-circuit •
Protection against polarity inversion •
Max. frequency 1,2 KHz
Digital output - Max current 100 mA
Maximum power input (with no sensors connected) 160 mA
Operating temperature
-20 °C ÷ 70 °C
-4 °F ÷ +158 °F
Storage temperature
-30 °C ÷ 80 °C
-22 °F ÷ +176 °F
Size 126 x 79 x 66 mm
Weight 245 g
13. END OF LIFE DISPOSAL
Dispose of the system in compliance with the established legislation in the country of use.