14
9.3
Hydraulic valve connection
Fig. 17
Bravo 180S can control up to 7 hydraulic functions through double-acting valves.
Fix the connectors to the relevant valves according to the initials indicated in your assembly general diagram
(7.1 System recommended composition).
• Position seal (
1
) onto connector (
2
), then connect the latter pressing it fully home (
3
):
during this operation, take special care not to bend valve electric contacts
.
• Insert screw inside connector, and screw it (
4
) until it is tightened.
The function of each switch on the hydraulic function control panel is described below.
• Connect the connector marked with "DD" to the pilot valve, and then the other connectors, as specified on the table:
CONTROL
MOVEMENT
CONNECTOR
Section movement / AUX switch opening
1 - 4
Opening
1 ÷ 4 A
Closing
1 ÷ 4 C
Boom height
Opening
AA
Closing
AC
Boom locking
Opening
BA
Closing
BC
Boom leveling
Opening
CA
Closing
CC
INSTALLATION
Summary of Contents for Bravo 180S Series
Page 41: ...Notes 41...
